Mailmodo 0ff833fb

Mailmodo Support

Stay updated on the status of all your company's support tickets.

Raise a Ticket here

Customer portal

 (formerly known as Integromat) is a no code workflow automation tool, with which you can connect Mailmodo to 1000+ apps. You can integrate Make with Mailmodo to implement the following use cases:

Login to your Make account and click on "Create a new scenario".

New scenario builder will open. Click on the purple color + icon in the center of the page i.e. "Add the trigger" app. Contacts will be sourced from this trigger app and imported to Mailmodo. For the purpose of this tutorial, we are going to select Google sheet as the trigger app. Any new contact added to the Google sheet will be added to a list in Mailmodo.

The steps mentioned below are for Google sheet. They can vary depending on the trigger app you use.

Connect your Google account. Select the spreadsheet from which you would want to push data. If there are headers, click on Next. Select the row range you have the headers on. Enter the maximum number of rows that would be worked on in one execution cycle.

In ‘Choose where to start’, you can select the options based on your data set in the google sheet. If you want to start the cycle from a particular data element, you can select it by using its ID or choosing manually from the list.

Click on the clock icon to configure the frequency of scenario.

Click on the semi circle to add another module.

Search for ‘Mailmodo’ to add it as a module. Select Add to contact list as the action.

: Connect your Mailmodo account. Click on Add (under Connections). Paste the API key copied from Mailmodo.

Map the Email field to the column in your spreadsheet containing Email ID's.

Also, select the list to which the contact will be added in Mailmodo. Map personalization parameters to the corresponding columns in Google sheet.

These are the default personalization properties in Mailmodo-

 Once done, click on Ok. You can test your scenario by running it once. When you click on Run once, any new contact added to Google sheet will be added to a list in Mailmodo.

If there are any errors, you would be able to see them by clicking on the bubbles present at the top of the modules.

Once the scenario is successfully tested, you can schedule it as per your requirements.

Every time a new contact is added to the Google sheet, the contact will be imported to a list in Mailmodo.

How to import contacts to Mailmodo via Make?

Step-by-step guide for exporting template submission via Make

How to install the Mailmodo app to your Make workspace

 to install the Mailmodo app to your Make workspace.  

Sign in to your Make account. If you don't have an account, you can create one. Select the organisation to which you would like to install the app. Click on 

You would be redirected to the Make dashboard. Go to 

. You would be able to see Mailmodo here.

 How to configure the template and get the API key in Mailmodo

Go to templates from the vertical menu on the left. Create a new template or use a pre existing template as per your requirements. Open the template in the editor.

Click on form submission to external apps. 

: This button would only be enabled once you have inserted at least one form in your template. 

 against the form for which you want to export submissions.

You would be able to see Make under Available for connection. Click on the authentication CTA. If you have integrated Make with Mailmodo before, then you will see Make as Activated. In that case, click on See details. A modal will open. Copy the API key. We will use this in Make setup.

To access the API key later, go to the integrations tab from the vertical menu on the left. Locate Make> Authentication CTA/See details>Copy API key

Login to your Make account and Create a new scenario.

New scenario builder will open. Add Mailmodo as a module. Select export submissions as the trigger event. 

Note- You need to install the Mailmodo app for it to be visible here. 

Connect your Mailmodo account. Click on Add (under Webhook). Paste the API key copied from Mailmodo.

Select the template for which you want to export submissions. Select the form (in the template) whose responses you would like to export

Add the module to which you would like to export data. For the purpose of this tutorial, we are going to export form submissions to Google sheets. 

The steps mentioned below are for Google sheet. They can vary depending on the module you use.

 Connect your Google account. Select the spreadsheet to which you want to export form submissions.

Map the form questions to sheet columns. For eg. Responses for the question "Please enter your name" will be recorded in column A.

Once done, click on Ok. You can test your scenario by creating a sample campaign (using the selected template) in Mailmodo. Once the campaign is enabled, click on Run once. Template submissions will be exported to Google sheet. 

 Create and send a campaign using the selected template in Mailmodo. Once the campaign is enabled, configure and run the scenario as per your requirements. All form submissions will be recorded in the Google sheet.

To stop exporting submissions, you have to turn the scenario off from Make.

If you face any problem then reach out to us at 

How to export template submissions to your software stack via Make?

 (formerly known as Integromat) is a no code workflow automation tool, with which you can connect Mailmodo to 1000+ apps. You can integrate Make with Mailmodo to implement the following use cases-

How to create a transactional campaign in Mailmodo

 Go to templates from the vertical menu on the left. Click on create new template.

Either select a blank template or a pre made template. 

 to edit the template. Save and rename the template upon completion.  After saving, click on the back arrow.

You will be redirected to the template library. The saved template should be visible here.

 You will be redirected to the home page. Click on Trigger under Campaigns from the vertical menu on the left. Next, click on Create trigger campaign.

 Select the template you saved before. Click on next.

 Add Subject Line, Pre-header text, From name and Reply to email. Click on next.

 You will be redirected to trigger on events. Select Make from the list of platforms. Click on next.

 Review and test your campaign. To test, click on send test campaign->enter email ID->send test email.

Once tested and reviewed, click on enable campaign.

You will be redirected to Campaign page. Select

 -> Click on Show API key. Copy the key. We will use this in Make setup.

To access this page in future, go to trigger in the vertical menu (left side)->select the campaign-> setup steps

New scenario builder will open. Add the trigger app. An event recorded in this app will trigger the campaign in Mailmodo. For the purpose of this tutorial, we are going to select Google sheet as the trigger app. Addition of a new email id in the Google sheet will trigger the campaign.

Search for ‘Mailmodo’ to add it as a module. 

Connect your Mailmodo account. Click on Add (under Connections). Paste the API key copied from Mailmodo. 

Enter the list name to which the contacts will be added in Mailmodo. You can enter the name of a preexisting list or create a new list.

Select the campaign you created in Mailmodo. 

Once the campaign is selected, you would be able to see personalisation parameters present in the campaign (if any). You can map these to the corresponding column headers in Google sheet.

Once done, click on Ok. You can test your scenario by running it once. When you click on Run once, an email will be sent to any new email id added to the Google sheet.

That's it! You have successfully configured a campaign which will be triggered every time a new contact is added to the Google sheet.

How to trigger campaigns in Mailmodo via Make?

Step-by-step guide to trigger journey via Make

Go to journeys from the vertical menu on the left. Create a new journey.

The journey builder will open. Select Make as the trigger app. Add the relevant actions, delays and conditions. 

Go to integrations from the vertical menu on the left. Locate Make (under Available for connection) and click on the authentication CTA. A modal will open. Copy the API key. 

If you have previously integrated Make with Mailmodo, then Make would be visible under Connected platforms. Click on See details to open the modal and copy the API key.

New scenario builder will open. Add the trigger app. An event recorded in this app will trigger the journey in Mailmodo. For the purpose of this tutorial, we are going to select Google sheet as the trigger app. Addition of a new email id in the Google sheet will trigger the journey.

Click on the semi circle to add another module. Search for 

Enter the list name to which the contacts will be added in Mailmodo. You can enter the name of a pre existing list or create a new list.

 Select the journey you created in Mailmodo.

. You can test your scenario by running it once. When you click on 

 once, the journey will be executed for any new email id added to the Google sheet.

That's it! You have successfully configured a journey which will be triggered every time a new contact is added to the Google sheet.